Crown DCi8-600DA
รหัสสินค้า : Crown-DCi8-600DA
ราคา |
0.00 ฿ |
จำนวนที่จะซื้อ | |
ราคารวม | 0.00 ฿ |
สินค้าไม่เพียงพอ
สินค้าหมด
Crown DCi8-600DA
For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport.
Specifications
- Redundant, independent Dante / AES67 ports
• Primary & Secondary
• Will accept 48khz or 96khz
• Capable of sending out Dante / AES67 audio from analog inputs pre/post processing (@ 48kHz)
- Audio Architect Control and Monitoring
- DriveCore Amplifier Technology
- Universal PFC Power Supply
- DSP
• 48kHz processing
• 20 Presets
• Input router
- High, medium, and low priority inputs
• Input delay up to 2s
• Input EQ
• Crossover
• Output EQ
• Output Delay up to 100ms
• LevelMAX limiter
• Load Monitoring
- Pilot tone
• Normal
• Burst
- Continuous Load Monitoring
- Sweep Load Monitoring
• Channel Auto-Standby
• Speaker Tunings
- Aux-Port
• Sleep contact closure
• Amp Status output
- Removable air filters
- Front panel LED indicators
- AES67 Compatible
Features
INTEGRATED DANTE™ / AES67 NETWORKED AUDIO – Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager.
NETWORK CONFIGURATION, MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORT – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
DIGITAL SIGNAL PROCESSING – DSP capabilities include the following:
LevelMAX Limiters
Input/Output EQ
Crossover
Delay
Matrix Router
Speaker Line Monitoring