sE Electronics sE7 Matched Pair

Small-diaphragm Cardioid Condenser Mic with 80Hz Highpass Filter, Pad, and Gold-plated XLR (pair)

Convincing stereo recordings require microphones with high consistency and accurate localization from the pair of microphones. Therefore, at sE every pair is selected from hundreds of individual microphones to provide identical performance.

The result is the highest possible correlation over the whole frequency range, and virtually identical sensitivity for stunning three-dimensional recordings.

sE Electronics : sE7 (Pair)

sE7 เป็นไมโครโฟน condenser ขนาดเล็กที่มีคุณภาพสูง เหมาะสำหรับใช้ในห้องสตูดิโอ สามารถบันทึกเสียงสดจากกีต้าร์อะคูสติกไปจนถึงเปียโน

sE Electronics sE7 Small-diaphragm Condenser Microphone Stereo Pair Features:

Innovative back-electret design delivers detailed, balanced sound and superior transient response
High-quality condenser capsule delivers balanced, neutral sound
Ultra-thin diaphragm for excellent transient response
Versatile cardioid polar pattern, ideal for most studio or onstage applications
State-of-the-art discrete Class A circuitry with class-leading low self-noise
Frequency response: 20Hz–20kHz
Signal to noise ratio: 78dB
Transformerless design for pristine sound quality
Switchable 20dB pre-attenuation pad provides extended dynamic range, enables close-miking of loud sources, and prevents preamp overload
Maximum SPL (0.5% THD): 136/156dB (0/20dB pad)
Switchable 80Hz, 6dB/octave highpass filter eliminates low-frequency rumble and compensates for proximity effect
Powering: 48-volt phantom power
Gold-plated XLR connector for reliable, loss-free signal connection
All-metal housing for rejection of noise and electrical interference
High-quality finish ensures a great look for many years
Includes mic clip (with thread adapter) and windscreen

IN THE BOX

sE7 (Matched Pair)

2x sE7 microphone
2x mic clip (with thread adapters)
2x wind screens

SPECIFICATIONS

sE7 FR-PP

Capsule Type: 1/2“ back-electret condenser capsule

Polar Pattern: Cardioid

Frequency range: 20 Hz - 20 kHz

Sensitivity: 19 mV/Pa (-34.5 dBV)

Max SPL: 136 / 156 dBSPL (0/20 dB Attenuation pad)

Equivalent noise level: 16 dB(A)

Dynamic range: 120 / 140 dB (0/20 dB Attenuation pad)

Signal to Noise Ratio: 78 dB

Low-cut filter: 80 Hz, 6 dB/Oct, switchable

Attenuation Pad: 20 dB, switchable

Powering: 48 Volts according to IEC 61938

Electrical Impedance: <200 Ohms

Recommended load impedance: >1k Ohms

Current consumption: 3.0 mA

Connectivity: 3-pin male XLR connector

Dimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in)

Weight: 128 g (4.52 oz.)